Licensed ECRA/ESA contractor · Napanee, ON

Electrical and controls for sites that can't go down.

Commercial and industrial electrical out of Napanee, serving plants, QSR stores, hospitals and EV sites across Eastern Ontario. On call after hours.

Need work done at the house or the farm? We do that too.
ESA Licence #7017938 Insured & bonded WSIB compliant 24/7 service
Who we work for

The sites we know best.

Knowing the building beats generic expertise. We learn your site, its panels and its history, and keep coming back to it.

Electrician troubleshooting a controls panel Industrial

Industrial plants

PLCs, drives, plant lighting and weekend call-ins when a line goes down.

Valla service van at a commercial site Commercial

Commercial & QSR

Service calls, renos and new builds for restaurants and retail, direct or through your GC.

Healthcare imaging suite lighting Institutional

Healthcare

Careful work in occupied buildings, including the MRI install at LACGH.

EV charging

EV charging

Level 2 and DC fast chargers for workplaces, fleets and retail lots. Load calc, permit and install.

Industrial controls install
Root causefound on the controls side, by reading the logic
The difference

We came up on the controls side.

PLCs, VFDs and OPC came first for us, then panels and pipe. When a line goes down, we read the logic and trace the fault to the root cause.

Plants that cut their internal programmers have a gap. We fill it, and we answer the phone on weekends.

  • PLC programming and troubleshooting
  • VFD setup, tuning and drive faults
  • Industrial networks and protocol work
  • After-hours and weekend plant coverage
What we do

From the drawing to the last breaker energized.

New builds, renos, service and troubleshooting for commercial and industrial sites.

Commercial & industrial installs

New builds, tenant fit-ups, renos and service work, direct for the owner or through your general contractor.

Automation & controls

PLCs, VFDs and industrial networks. When a line goes down we trace it back to the actual fault.

EV charger installation

Level 2 and Level 3 DC fast chargers. Load calcs, permits and a feed sized to carry the charger, wired to code.

Panel upgrades & service

New panels, service upgrades and added circuits. Every breaker labelled, so the next person knows what feeds what.

Lighting & heating

LED retrofits, new lighting layouts and electric heat. Cut the power bill and light the space properly.

Electrical design & drafting

Planning and drawings from concept to energized, so the crew works off a real set.

Also on the truck: substation and high-voltage work, and after-hours emergency service for plants and commercial sites.

Homes, farms and shops

Yes, we do houses. And barns.

Out here a lot of the work is a house, a barn or a shop, and we take those calls. Same licence and the same crew that wires the plants, and your panel gets labelled the same way.

Small jobs are fine. A breaker that keeps tripping is a real call, and we'll come out for it.

Living room pot light install

Panels and services

Service upgrades to 200 amps, overhead or underground, and subpanels for the garage or shop. Every breaker labelled.

Troubleshooting

Breakers that keep tripping, lights that flicker, a dead circuit, a well pump that won't start. We find the actual fault before we swap any parts.

Generators

Generator hookups with a transfer switch or panel interlock, so the well pump and the furnace keep running when the power goes out.

Barns and shops

Feeds out to the barn or the shop, plus the lighting and the welder circuit. We wire a shop like a small plant, because that's what it is.

Renos and new homes

Basement finishes and new builds. We price them in stages (service, rough-in, finish) so you can see where the money goes.

EV chargers at home

Level 2 charger in the garage or the driveway. We do the load calc first, so you know whether the panel can carry it before you buy anything.

Recent projects

A few jobs from the last couple of years.

MRI electrical install
Healthcare · Napanee

MRI install, LACGH

Electrical for the hospital's new MRI.

Industrial · Belleville

Kellogg's plant addition

Electrical on the new addition at the Belleville plant.

QSR · Lindsay to Ottawa

McDonald's menu board refresh

Electrical for the refresh at every eastern-region store, Lindsay out to Ottawa.

How we work

The boring stuff that separates a good contractor from an average one.

01

Answer the phone, show up

Say what it'll cost and follow through. Most of the gap between a great contractor and an average one is right here.

02

Diagnose, don't guess

Find the actual root cause, especially on the controls side. No swapping parts and billing it as troubleshooting.

03

Clean, labelled, documented

Neat installs, labelled panels, prints left behind. Nobody should have to guess what feeds what after we leave.

04

Honest bids for GCs

Lean numbers with exclusions on the face of the letter, so you can compare like-for-like.

Get in touch

Got a job that needs pricing?

Call, text or start a chat. Tell us what you've got and we'll tell you straight whether it's a fit and what it'll take.

Shop
5810 County Road 9, Napanee, ON
Service area
Napanee, Kingston, Belleville, Brockville and out to Ottawa
Hours
Around the clock, after-hours and weekend coverage
Chat with usOnline now

Message us live right from the site. If we're out on the tools, send a text or give us a call and we'll get straight back.

Certificates of insurance, bonding and WSIB clearance available on request.